Easter Garland

Here is a great way to spruce up your eve for Resurrection Sunday.

This garland simple to make. I used a string of white LED lights that have a crystal cover that pops off, shiny Easter garland and plastic eggs.

Here is a video of the garland during the day. 

Here is a video of the garland at night.

I Dremel-ed a quarter inch  whole in each egg, popped the crystal off the light, poked the LED through the whole then snapped the crystal back on.

Then I wrapped the garland around the length of the wire and hung it up.

All content and information I present on this blog is intended for entertainment only and is presented “as is”, without claims or warranties of any kind, express or implied. I am not an expert of any kind; I just figure out how to make and create projects and I am willing to share that information. USE THIS INFORMATION AT YOUR OWN RISK! USE OF THIS INFORMATION CONSTITUTES AN AGREEMENT BY THE READER TO ASSUME ALL RISKS! The reader’s interpretation and application of this information shall be the reader’s sole responsibility. The reader agrees to hold harmless the author and publisher and therefore in no event shall the author or publisher be liable to the reader or any third party for any damages, claims, expenses or other costs; including, without limitation, legal fees arising from or in connection with the use of this information. The reader further agrees that their sole and exclusive remedy is to discontinue use of this information. I hold the copy right to the content if this blog and it may be used only with my permission. Your personal or contact information will not be shared with anyone, by me. I am not responsible for what the publisher or any of its partners do with your information. I reserve the right to change, close, sell or change the terms of use for this blog at any time. I am not responsible for any of the behavior or products presented by advertisers or sponsors in connection with this blog. If you wish to ask a question you may email me, however, I check my email about four times a year so a comment may work better. Please understand that any comments or emails sent become my property to use as desired.

Red Truck Ornament Saga

It should have been simple. All I needed to do was purchase a few 1 inch or 1 1/4 inch long red trucks; glue some Christmas trees in the back and put them in the ornaments. 

This all started before Christmas last year, 2017, I usually give ornaments as gifts to a few of the people I work with. One co-worker hinted that she would like a red truck in her ornament.

She and I both remember the annual picnic trip to the forest to cut a Christmas tree, and if you're like us you feel a special nostalgia for the red truck bringing the December icon. Now-a-days I use artificial trees, but still enjoy setting up and decorating three trees with my wife. I hope that your family has a wonderful tradition of putting up and decorating a Christmas tree.

I explain how I make these ornaments back in August of 2016. Here is a link.

August 2016

So I decided to make a few red truck ornaments last year, but could not find trucks the correct size.  Matchbox and Hot Wheels are too big! I searched the Christmas sections of every store; no suitable trucks were discovered. 

So last year I was unable deliver the red truck ornaments. 

This year I cut six trucks out of wood with $40 yard sale find scroll saw and a file. The wheels are sliced dowel rod. I used them with some success.

I figured I could find the correct truck on websites to print on my 3D printer, but I did not find the trucks I needed there either.

The 3D printer only cost $200 on Monoprice and the filament is affordable. 3D printing does require a little bit of technical learning, but I think it is worth it. 

I used Tinkercad.com to "draw" the red truck I thought would work. 

It turned out pretty good, and works great. Someone suggested what I already felt, there is an older model truck that is used also.

Here is a link to Thingiverse.com to gain the files, for free, to print for yourself.

link to download files to print.

So I drew that truck also. 

I'm happy with the results.

Here is a link to Thingiverse.com to gain the files, for free, to print for yourself.

Link to download files to print.

I used the 3D pen, a last year Christmas gift from my daughter, to create the trees.  Thank you, Andie.

Once painted the trucks are ready for next year's ornaments. 

All content and information I present on this blog is intended for entertainment only and is presented “as is”, without claims or warranties of any kind, express or implied. I am not an expert of any kind; I just figure out how to make and create projects and I am willing to share that information. USE THIS INFORMATION AT YOUR OWN RISK! USE OF THIS INFORMATION CONSTITUTES AN AGREEMENT BY THE READER TO ASSUME ALL RISKS! The reader’s interpretation and application of this information shall be the reader’s sole responsibility. The reader agrees to hold harmless the author and publisher and therefore in no event shall the author or publisher be liable to the reader or any third party for any damages, claims, expenses or other costs; including, without limitation, legal fees arising from or in connection with the use of this information. The reader further agrees that their sole and exclusive remedy is to discontinue use of this information. I hold the copy right to the content if this blog and it may be used only with my permission. Your personal or contact information will not be shared with anyone, by me. I am not responsible for what the publisher or any of its partners do with your information. I reserve the right to change, close, sell or change the terms of use for this blog at any time. I am not responsible for any of the behavior or products presented by advertisers or sponsors in connection with this blog. If you wish to ask a question you may email me, however, I check my email about four times a year so a comment may work better. Please understand that any comments or emails sent become my property to use as desired.